UPVC Door Lock Replacement
UPVC doors are a great security measure against burglaries. They do have some limitations, but they can be overcome with the installation of a deadlock.
If your uPVC front door lock is loose or floppy, it may be time to replace the lock's barrel. This simple DIY project can enhance the security of your home and boost its appearance.
The old lock cylinder must be removed.
If you're noticing that your front door is weak when you lock it or that the key is struggling to turn, you could have a damaged lock cylinder. It will improve security and smooth operation by replacing it. The procedure is simple and should only take 30 minutes. The only tool you'll require is an screwdriver. To start you must open your door and take a look at the edge of the lock cylinder. You should see a screw there that is approximately in line with bottom of the cylinder. Take it off using the help of a screwdriver, and store it somewhere safe.
You'll have to know the dimensions of your current cylinder to ensure you can locate a suitable replacement. Typically, the sizes vary from 60mm to 110mm. To determine the size of the lock, you will have remove the screw from the faceplate. You can also try to turn the lock handle using the key while the cylinder is still in place to determine how much it changes in each position.
Next, you'll need to measure the cylinder diameter and cylinder cam length. These measurements are essential to ensuring that your new lock will be able to fit into the door. The dimensions may differ based on the kind of uPVC. You'll need to select a replacement that is the same or slightly larger than the existing cylinder.
Once you have the measurements then it's time to take the old cylinder from the door. It's a fairly simple job, but it's essential to do it properly to avoid damaging the door or frame. It is also important to ensure that the door is opened or secured safely so that it doesn't close between steps.
A professional locksmith is an ideal option if you don't feel like doing it yourself. They can provide expert advice, perfect execution, and peace of mind. They can also help you choose a safe and secure locking system. DIY is a great method to save money and gain new skills. All you require is patience and the right tools like a Phillips screwdriver. It's not as difficult as you might imagine to replace your uPVC locks.
Installing a new lock cylinder
If you are replacing the lock on your front door, it is crucial to take the correct measurements and follow steps to make sure that the new lock is put in the right way. This will not only help you avoid problems in the future but keep your home safe and permit you to use a key to both sides of the door. You should determine the uPVC lock's overall length as well as the backset and cylinder size before replacing it. These dimensions will ensure that the new lock cylinder is able to fit inside the uPVC frame and functions correctly without any gaps or weaknesses in security.
The first step of the process is to unbolt the door handle by loosening the screws that hold it with the help of a screwdriver. The next step is to locate the screw that holds the cylinder lock in place and remove it. Then, you can take out the lock cylinder that was previously in place by inserting a lock key into the cylinder and turning it to the left and the right. You can take the cylinder out when the key is in one of these positions.
Installing the new cylinder into the front door is relatively simple and requires the same steps you followed to remove the old one. It is important to be aware that the new cylinder won't fit in the space created by the old cylinder. This is because the cylinder needs to be aligned correctly to allow it to be locked and closed using keys. It is important to ensure that the cylinder is in the center and has a circular keyway.
Installing a new uPVC lock for your front door is not difficult, but you should be careful not to damage the handles or door frames. If you are uncertain about your abilities to complete this project, you should hire a professional who is a Checkatrade-approved locksmith and has experience with the various types of doors. A locksmith can help you save money and time by completing the job quickly.
Attaching the door handle
There are several reasons you might want to upgrade the lock on your front door. You might have lost a key, your previous tenant hasn't returned the keys or you want to upgrade to more secure locks. It takes only five minutes to change the barrel on a lock of a uPVC front door. You'll need a Phillips-head screwdriver, the new cylinder for the lock and an extra key (if you plan to use one). Make sure the door is propped open or secured in a secure way so that it won't close during the process.
It's not as hard as you may imagine to replace the lock mechanism on the uPVC door. Begin by determining what kind of lock is installed on your front door, then determine the size that you need to replace it. For older doors there are strip locks and multipoint locks. Once you've identified the brand and type of lock that is on your uPVC front door, it's much easier to find a replacement that is similar.
Once you've replaced the cylinder, you'll need connect the door handle back to it. First, you'll need to loosen the set screw on the shaft of the handle using the help of a screwdriver or an Allen key. This will permit you to remove the handle and expose the spindle shaft. If the shaft is threaded you will need to loosen a bit before backing it up a bit with a screwdriver in order to ensure that it is properly fitted.
After you've tightened the screws on the new handle and lock cylinder, it's time to test the lock. Check that the key turns easily and is well-fitted, and the locking mechanism of the handle is operating well. If you don't feel comfortable doing this yourself you can have a locksmith do the job for you.
It's also important to note that uPVC door handles and lock mechanisms require regular lubrication to ensure their functionality. This is especially applicable in areas that experience high wear and tear, such as those that are used frequently or locked and shut. A small amount of lubricant will go in a great way to ensure that they function properly and will extend their lifespan.
Test the new lock
A Upvc lock is an essential element in the security of your home. Like all other devices the uPVC lock may be damaged or worn out in time. Regular maintenance is the key to a functional uPVC locking system. This will prevent malfunctions from occurring and can compromise your home's security. This can be accomplished by lubricating internal mechanisms once every six months with a dependable oil. This will ensure that the lock is running smoothly and stop it from rusting or getting damaged.
Apart from the standard oiling, you can apply a silicon-based spray to loosen the keyway and make it easier to insert the key. This is an easy DIY solution that will save you money in the long term. Make sure you don't apply WD-40 as it can leave oil residue that could potentially damage the lock.
It is important to test the new cylinder following installation before you assume it will function properly. You can do this by testing the handle both from the inside and outside of the door. Then, put the handles back in position and re-insert the screws into the spindle to confirm that everything is in order. Replace all the screws that held the handles in place. Give yourself a pat on the back for a good job!
A locksmith can also install additional features to enhance the security of your home, such as door chains or sash jammers. replacement lock for upvc door can even help you select the right locks for your home. A professional can also assist you in determining the best lock cylinder size for your doors. This is crucial because a wrong lock can compromise security.
The cost of replacing a uPVC lock will vary based on the type of lock you choose and the number of doors that need to be replaced. The average cost of a professional locksmith will range from PS75-PS100 per hour, but the price will vary depending on your location and the kind of lock you require. It is also important to compare locksmith prices before selecting a locksmith.